|
|
GAM.net.auGAM's 'Personal' Web PresenceDocumenting
some of the things I like, I do and I enjoy... and hopefully providing
information, insight and interest for others.
|
|
| Home Contact |
| |
PC ModsWORKLOG: GAM's HTPC - Simple Modding Make-Over PC Front Panel Mod - Air Intake - Part 1 PC Front Panel Mod - Air Intake - Part 2 (Duct) E6400 Core 2 Duo, Gigabyte GA-965P-DQ6, ThermalTake Big Typhoon - Part 1 E6400 Core 2 Duo, Gigabyte GA-965P-DQ6, ThermalTake Big Typhoon - Part 2 E6400 Core 2 Duo, Gigabyte GA-965P-DQ6, ThermalTake Big Typhoon - part 3 (DUCT MOD - Part 2) Sneak Peek - Current and in-progress mods to 'Main' Products |
|
|
!! Site Under Construction !!PC Front Panel Mod - Air Intake - Part 1- Cut front slots, fan hole, cut and fit MeshX grillsLast update: February 2007 Copyright © 2007 Greig Mackenzie. All rights reserved. Overview
These pages illustrate how I modified the front panel of HTPC to allow sufficient air intake and the duct that I created to marry the two front grills with fan behind. The duct was created using fibre glass based on a form created from foam panels. This was my first attempt at fibre glassing! If you are interested in doing this yourself, please read on... DISCLAIMER: The author cannot be held responsible or liable for any damages that could occur to you or your equipment while following the procedures presented on these pages. Also, the author gives ABSOLUTELY NO WARRANTY on the correctness and usability of the information provided on these pages. Please note, however, that the procedures set out on these pages have worked for the author without damages or problems, except where noted. Please don't say I didn't warn you!
See Also
Worklog - GAM's HTPCOverclockers Australia (OCAU): Front Panel Intake Duct Mod (built from scratch using fibreglass) – GAM's HTPC |
| Home Contact |
| |
|
© 2006-2007 GAMdesign. Website designed and maintained by GAMdesign - Webmaster. Hosted by Australian Webpage Effects (AWE).
|
